Corrosion Resistant 100% Solids (Zero VOC) Epoxy High Performance Lining

Duromar HPL – 1110

DUROMAR HPL-1110 is a flexible, low viscosity, easy-to-use coating system used on structural steel, tank exteriors, or other areas where extra corrosion resistance is required. It is shipped DOT non-corrosive

Components 2
Visual Appearance High Gloss
Density 1.25
Solids by Weight 100%
pH Range 2.5-14
Inorganic Acids Good
Organic Acids Good
Alkalis Good
Solvents Fair
Hydrocarbons Good
Max. Dry Operating Temp 135°C
Functional Cure 60 Hrs.
Full Cure 120 Hrs.
Repair System EAC
Surface Preparation SSPC-SP 10
Adhesion Excellent
Flexibility Excellent
Pot Life 45 min.
Equipment Brush, Roller, Airless Spray
Number of Coats 2-3
Theoritical Coverage 3.72 m²/4.55 liters/1.016 mm
Film Thickness/ Coat 0.254 mm (min) 0.635 mm (max)
Equipment Brush, Roller, Airless Spray
Max.DFT 1.90mm
Recoat Time @ 21°C 8 hr. min. 120 hr. max.
Min. Application Temp 4°C
Mixing Ratio By Weight 2.7:1 (B/A)
Mixing Ratio by Volume 2:1 (B/A)
Dry to Touch 10 hrs.

Key Features


High Corrosion Resistance

Low Viscosity

Increased Asset Life

Cooling Tower Structurals Protected With Duromar 1110